Esta guía aún no está disponible en tu idioma, por lo que se muestra en inglés.
MSI MAG B760 TOMAHAWK WIFI upgrade guide
Actualizado el 30 de octubre de 2026 · Escrito a partir de las especificaciones verificadas de este dispositivo
The MSI MAG B760 TOMAHAWK WIFI is an ATX board with four DDR5 memory slots, three M.2 slots, four SATA ports and a socketed LGA1700 CPU socket. This guide covers what you can add to each of them and the limits that matter when you buy. One warning first: MSI also sells a MAG B760 TOMAHAWK WIFI DDR4 board. The two boards look almost identical but are electrically incompatible with each other's memory. The DDR5 board is the one with the 7D96-001R designation — check the '-00xR' suffix and the DDR5 label on the box before you buy RAM. Memory (RAM) The board takes four full-size DDR5 DIMMs (not laptop SO-DIMMs) in a dual-channel layout — two slots per channel. There is no soldered memory, so every module is user-upgradable. What fits: standard unbuffered, non-ECC DDR5 desktop modules only. ECC and registered (RDIMM/LRDIMM) memory is not supported — the B760 chipset can't use it, so paying more for server or workstation memory gains you nothing here. The board supports Intel XMP 3.0 memory profiles. How much: MSI's current specification page says a maximum of 256 GB (four 64 GB-class modules). The PDF user manual says 192 GB (four 32 GB modules). This is a difference in document age rather than a hardware difference — the manual was written when 32 GB modules were the practical limit. In practice, 48 GB and 64 GB modules may need a current BIOS before they're recognised properly, so update the BIOS first if you're buying high-capacity sticks. How fast: 7000+ MT/s is realistic with one module per channel (1DPC 1R) and suitable memory. Fill all four slots and speeds drop to roughly 5600+ MT/s class. The JEDEC baseline is 4800–5600 MT/s, so without XMP enabled your modules may simply run at their SPD speed; you set the DRAM frequency in the BIOS. MSI warns that overclocking results depend on the CPU, the memory and your cooling, and it recommends extra memory cooling for full four-DIMM or overclocked installs. Watch out for: mixing different types, capacities or densities within a channel is a common cause of instability — use the same modules in each channel, ideally a matched kit. Check MSI's memory QVL before buying, especially if you want high speeds. Buying tips: - DDR5 only — DDR4 modules physically won't fit and won't work. - Buy a matched kit from the QVL if you care about XMP speeds. - Plan for one module per channel if you want 7000+ MT/s; four modules trade speed for capacity. - Skip ECC or registered memory; it isn't supported. Storage There are seven storage connections: three M.2 slots and four SATA 6 Gb/s ports. M.2 slots: all three are Key-M, all run at PCIe 4.0 x4 (roughly 64 Gbps) with NVMe SSDs. M2_1 is fed directly from the CPU and is the only slot that accepts the long 22110 format; it also takes 2242, 2260 and 2280 drives. M2_2 and M2_3 come from the B760 chipset and take 2242, 2260 and 2280 drives. M2_3 additionally accepts SATA-protocol M.2 SSDs. SATA: four SATA 6 Gb/s ports (SATA_5 through SATA_8). One sharing rule matters: a SATA-protocol M.2 drive in M2_3 disables SATA_7, leaving you three SATA ports. An NVMe drive in M2_3 does not disable anything. RAID: the manual documents RAID 0/1/5/10 for SATA devices only. There is no documented NVMe RAID support, so don't buy this board expecting RAID 5 or 10 arrays of M.2 drives. Capacity: MSI doesn't publish a per-drive capacity limit, so any current M.2 or SATA drive works within the interface limits above. Drive bays for 2.5-inch and 3.5-inch drives come from your case; the board just provides the four SATA ports. Installation details: all three M.2 slots are covered by MSI 'M.2 Shield Frozr' heatsinks. If your SSD ships with its own heatsink, use one or the other — remove the board's plates and thermal pads rather than stacking them. Retention uses MSI's EZ M.2 Clip, and mounting kits for 2242 and 2260 drives are included for M2_2 and M2_3. Watch out for: think about drive layout before you fill M2_3 with a SATA drive, because it costs you a SATA port. If you want the fastest boot drive, M2_1 is the slot wired straight to the CPU. Buying tips: - Any PCIe 4.0 x4 NVMe SSD in 2280 format is the easiest upgrade. - Pick M2_1 for the drive you boot from. - Keep SATA drives in the four SATA ports if you want all of them available. - Don't stack a second heatsink on an M.2 drive. CPU The socket is LGA1700 and it's a standard socketed fit — the processor is user-replaceable. Supported families are Intel 12th, 13th and 14th Gen Core processors, plus Pentium Gold and Celeron chips on LGA1700. Version note: MSI's older manual wording lists 12th and 13th Gen only, while the current spec and product pages add 14th Gen. That's a documentation gap, not a board difference — but specific 14th Gen chips may need a current BIOS. Check MSI's CPU support list for the exact processor you want and the BIOS version it requires. Overclocking: B760 allows memory overclocking through XMP but not CPU core overclocking. If you want to overclock the processor itself you'd need a different chipset (Z690/Z790). An unlocked K-series chip still runs at its stock boost behaviour here. Power: MSI publishes no hard TDP limit for this board. The 12+1+1 VRM and dual 8-pin CPU power connectors are designed with high-power multi-core chips in mind, including 253 W-class i9 parts on LGA1700. Treat that as a design goal rather than a guaranteed specification. Video output: the board's HDMI and DisplayPort outputs need a CPU with integrated graphics. If your chosen processor has no iGPU, you'll need a discrete graphics card for any display. Watch out for: update the BIOS before swapping CPUs if your board came from old stock, and remember there's no CPU core overclocking on this chipset. Buying tips: - Check MSI's CPU support list for your exact chip and required BIOS. - Choose a CPU with integrated graphics if you rely on the board's HDMI/DP outputs. - Don't pay a premium for an unlocked chip expecting to overclock it here. How to install (general steps) Whatever you're adding, the safe sequence is the same: 1. Back up anything you care about. 2. Shut down, switch the PSU off and unplug the power cable. 3. Ground yourself before touching components. 4. Open the case and install the part. 5. Close the case and reconnect the power. 6. Start up and check in the BIOS/UEFI that the board sees the new memory, drive or processor, and that the capacity and speed look right. Device-specific details are covered in the sections above — the M.2 heatsink plates and EZ M.2 Clip, for example. For exact disassembly and torque or screw positions, follow MSI's owner's manual. While you're inside: MSI recommends a GPU support bracket for heavy modern graphics cards, to avoid stressing the PCIe 5.0 x16 slot. FAQ How much RAM can the MSI MAG B760 TOMAHAWK WIFI take? MSI's current spec page says 256 GB across four DDR5 slots (four 64 GB-class modules), while the PDF user manual says 192 GB (four 32 GB modules). The documents differ in age; in practice 48 GB and 64 GB modules may need a current BIOS to be fully supported. Does it support DDR4 memory? No. This board is DDR5-only. The MAG B760 TOMAHAWK WIFI DDR4 is a separate, electrically incompatible board — check the '-00xR' suffix and the DDR5 label on the box before buying memory. Does it support ECC or registered memory? No. Only unbuffered, non-ECC DDR5 is supported. How many SSDs can I install? Three M.2 SSDs (all PCIe 4.0 x4 NVMe; M2_3 also takes SATA M.2) plus four SATA 6 Gb/s drives. A SATA M.2 drive in M2_3 disables SATA_7. Does it support 14th Gen Intel CPUs? Yes, per MSI's current spec and product pages. The older manual wording only mentions 12th/13th Gen, and some 14th Gen chips need a current BIOS — check MSI's CPU support list for the exact processor and BIOS version. Can I overclock my CPU on this board? No. B760 allows memory overclocking (XMP 3.0) but not CPU core overclocking. References MSI MAG B760 TOMAHAWK WIFI specifications https://www.msi.com/Motherboard/MAG-B760-TOMAHAWK-WIFI/Specification MSI MAG B760 TOMAHAWK WIFI user manual (PDF) https://download-2.msi.com/archive/mnu_exe/mb/MAGB760TOMAHAWKWIFI.pdf MSI MAG B760 TOMAHAWK WIFI product page https://www.msi.com/Motherboard/MAG-B760-TOMAHAWK-WIFI MSI store — MAG B760 TOMAHAWK WIFI https://my-store.msi.com/products/msi-mag-b760-tomahawk-wifi-atx MAG B760 TOMAHAWK WIFI manual (ManualsLib) https://www.manualslib.com/guide/3270651/msi-mag-b760-tomahawk-wifi-motherboard-manual.html
De un vistazo
- Four DDR5 DIMM slots, up to 256 GB per MSI's current specs (the manual says 192 GB), non-ECC unbuffered only
- 7000+ MT/s with one module per channel; four modules drop to around 5600+ MT/s class
- Three M.2 PCIe 4.0 x4 slots plus four SATA 6 Gb/s; a SATA M.2 drive in M2_3 disables SATA_7
- LGA1700 socket with 12th–14th Gen Core support; memory overclocking only, no CPU core overclocking
- Check the -00xR suffix before buying RAM — a separate DDR4 version of this board exists
| 4× DDR5 DIMM (doble canal, sin ECC) | 4 × DDR5 DIMM · hasta 256 GB en total · 7000 MT/s |
|---|---|
| 3× M.2 PCIe 4.0 x4 + 4× SATA 6 Gb/s | 7 × DDR5 M.2 2242 / M.2 2260 / M.2 2280 / M.2 22110 (NVMe / SATA) |
| LGA1700 (Intel Core de 12.ª–14.ª gen) | LGA1700 · Core 12th gen, Core 13th gen, Core 14th gen |
Ciclo de vida y soporte
Ya no se vende nuevo. El fabricante no ha publicado una fecha de fin de soporte.
| Hito | Fecha |
|---|---|
| Lanzamiento Disponible para comprar por primera vez. |
27 de enero de 2023
Estimación
First retail availability (Japan, ¥36,980), per MSI Computer Japan launch note reported by ascii.jp. Announcement was 2023-01-05 (club386.com), which is not 'first available to buy'. The 2022-12-12 date on galaxus.be conflicts with the January 2023 launch and is treated as a pre-listing entry date, Fuente ↗ |
| Fin de venta El fabricante ya no lo vende nuevo (Dell lo llama 'End of Life', Lenovo 'Withdrawn'). |
17 de diciembre de 2025
Estimación
Reseller stock status ('seit dem 17.12.2025 nicht mehr erhältlich') for the DDR4 variant listed as 7D96-001R. Scan UK marks the DDR5 variant 'End Of Life / no longer available to purchase' but gives no date, so no date is taken from it. Fuente ↗ |
Las fechas no listadas no han sido publicadas por el fabricante o un tercero fiable.
Memory (RAM)
The board takes four full-size DDR5 DIMMs (not laptop SO-DIMMs) in a dual-channel layout — two slots per channel. There is no soldered memory, so every module is user-upgradable.
What fits: standard unbuffered, non-ECC DDR5 desktop modules only. ECC and registered (RDIMM/LRDIMM) memory is not supported — the B760 chipset can't use it, so paying more for server or workstation memory gains you nothing here. The board supports Intel XMP 3.0 memory profiles.
How much: MSI's current specification page says a maximum of 256 GB (four 64 GB-class modules). The PDF user manual says 192 GB (four 32 GB modules). This is a difference in document age rather than a hardware difference — the manual was written when 32 GB modules were the practical limit. In practice, 48 GB and 64 GB modules may need a current BIOS before they're recognised properly, so update the BIOS first if you're buying high-capacity sticks.
How fast: 7000+ MT/s is realistic with one module per channel (1DPC 1R) and suitable memory. Fill all four slots and speeds drop to roughly 5600+ MT/s class. The JEDEC baseline is 4800–5600 MT/s, so without XMP enabled your modules may simply run at their SPD speed; you set the DRAM frequency in the BIOS. MSI warns that overclocking results depend on the CPU, the memory and your cooling, and it recommends extra memory cooling for full four-DIMM or overclocked installs.
Watch out for: mixing different types, capacities or densities within a channel is a common cause of instability — use the same modules in each channel, ideally a matched kit. Check MSI's memory QVL before buying, especially if you want high speeds.
Buying tips:
- DDR5 only — DDR4 modules physically won't fit and won't work.
- Buy a matched kit from the QVL if you care about XMP speeds.
- Plan for one module per channel if you want 7000+ MT/s; four modules trade speed for capacity.
- Skip ECC or registered memory; it isn't supported.
Consejos de compra
- DDR5 only — DDR4 modules physically won't fit and won't work
- Buy a matched kit from the QVL if you care about XMP speeds
- Plan for one module per channel if you want 7000+ MT/s; four modules trade speed for capacity
- Skip ECC or registered memory; it isn't supported
Lo más barato compatible ahora mismo
- Kingston ValueRAM 16 GB (1×16 GB) DDR5-4800 DIMM $293.99 eBay US
- Crucial 16 GB (1×16 GB) DDR5-4800 UDIMM (desktop) $298.70 eBay US
- Crucial 16 GB kit (2×8 GB) DDR5-4800 UDIMM (desktop) $360.00 eBay US
Storage
There are seven storage connections: three M.2 slots and four SATA 6 Gb/s ports.
M.2 slots: all three are Key-M, all run at PCIe 4.0 x4 (roughly 64 Gbps) with NVMe SSDs. M2_1 is fed directly from the CPU and is the only slot that accepts the long 22110 format; it also takes 2242, 2260 and 2280 drives. M2_2 and M2_3 come from the B760 chipset and take 2242, 2260 and 2280 drives. M2_3 additionally accepts SATA-protocol M.2 SSDs.
SATA: four SATA 6 Gb/s ports (SATA_5 through SATA_8). One sharing rule matters: a SATA-protocol M.2 drive in M2_3 disables SATA_7, leaving you three SATA ports. An NVMe drive in M2_3 does not disable anything.
RAID: the manual documents RAID 0/1/5/10 for SATA devices only. There is no documented NVMe RAID support, so don't buy this board expecting RAID 5 or 10 arrays of M.2 drives.
Capacity: MSI doesn't publish a per-drive capacity limit, so any current M.2 or SATA drive works within the interface limits above. Drive bays for 2.5-inch and 3.5-inch drives come from your case; the board just provides the four SATA ports.
Installation details: all three M.2 slots are covered by MSI 'M.2 Shield Frozr' heatsinks. If your SSD ships with its own heatsink, use one or the other — remove the board's plates and thermal pads rather than stacking them. Retention uses MSI's EZ M.2 Clip, and mounting kits for 2242 and 2260 drives are included for M2_2 and M2_3.
Watch out for: think about drive layout before you fill M2_3 with a SATA drive, because it costs you a SATA port. If you want the fastest boot drive, M2_1 is the slot wired straight to the CPU.
Buying tips:
- Any PCIe 4.0 x4 NVMe SSD in 2280 format is the easiest upgrade.
- Pick M2_1 for the drive you boot from.
- Keep SATA drives in the four SATA ports if you want all of them available.
- Don't stack a second heatsink on an M.2 drive.
Consejos de compra
- Any PCIe 4.0 x4 NVMe SSD in 2280 format is the easiest upgrade
- Pick M2_1 for the drive you boot from
- Keep SATA drives in the four SATA ports if you want all of them available
- Don't stack a second heatsink on an M.2 drive
CPU
The socket is LGA1700 and it's a standard socketed fit — the processor is user-replaceable. Supported families are Intel 12th, 13th and 14th Gen Core processors, plus Pentium Gold and Celeron chips on LGA1700.
Version note: MSI's older manual wording lists 12th and 13th Gen only, while the current spec and product pages add 14th Gen. That's a documentation gap, not a board difference — but specific 14th Gen chips may need a current BIOS. Check MSI's CPU support list for the exact processor you want and the BIOS version it requires.
Overclocking: B760 allows memory overclocking through XMP but not CPU core overclocking. If you want to overclock the processor itself you'd need a different chipset (Z690/Z790). An unlocked K-series chip still runs at its stock boost behaviour here.
Power: MSI publishes no hard TDP limit for this board. The 12+1+1 VRM and dual 8-pin CPU power connectors are designed with high-power multi-core chips in mind, including 253 W-class i9 parts on LGA1700. Treat that as a design goal rather than a guaranteed specification.
Video output: the board's HDMI and DisplayPort outputs need a CPU with integrated graphics. If your chosen processor has no iGPU, you'll need a discrete graphics card for any display.
Watch out for: update the BIOS before swapping CPUs if your board came from old stock, and remember there's no CPU core overclocking on this chipset.
Buying tips:
- Check MSI's CPU support list for your exact chip and required BIOS.
- Choose a CPU with integrated graphics if you rely on the board's HDMI/DP outputs.
- Don't pay a premium for an unlocked chip expecting to overclock it here.
Consejos de compra
- Check MSI's CPU support list for your exact chip and required BIOS
- Choose a CPU with integrated graphics if you rely on the board's HDMI/DP outputs
- Don't pay a premium for an unlocked chip expecting to overclock it here
Lo más barato compatible ahora mismo
- Intel Core i3-12100F $103.99 eBay US
- Intel Core i5-12400F $129.99 eBay US
- Intel Core i5-14400F $139.99 eBay US
Cómo ampliar
Antes de empezar
- Back up anything you care about
- Shut down, switch the PSU off and unplug the power cable
- Ground yourself before touching components
- Open the case and install the part
- Close the case and reconnect the power
- Check in the BIOS/UEFI that the board sees the new memory, drive or processor
Pasos
- Back up your data
Back up anything you care about before opening the case. - Power down and unplug
Shut down, switch the PSU off and unplug the power cable. - Ground yourself
Ground yourself before touching components. - Open the case and install
Open the case and fit the part. Device-specific details — M.2 heatsink plates, the EZ M.2 Clip — are covered in the sections above. For exact disassembly, follow MSI's owner's manual. - Close up and reconnect
Close the case and reconnect the power. MSI recommends a GPU support bracket for heavy modern graphics cards, to avoid stressing the PCIe 5.0 x16 slot. - Check the BIOS
Start up and check in the BIOS/UEFI that the board sees the new memory, drive or processor, and that the capacity and speed look right.
Es bueno saberlo
- MSI's spec page claims 256 GB maximum memory while the PDF manual says 192 GB — a documentation-vintage gap; larger modules may need a current BIOS
- MSI's older manual wording lists 12th/13th Gen CPUs only, while current pages add 14th Gen; check MSI's CPU support list and BIOS version
- No CPU core overclocking on B760 — memory XMP only
- No NVMe RAID is documented; RAID 0/1/5/10 is SATA-only per the manual
- MSI publishes no hard CPU TDP limit; the power design is a target, not a guaranteed specification
Preguntas frecuentes
How much RAM can the MSI MAG B760 TOMAHAWK WIFI take?
MSI's current spec page says 256 GB across four DDR5 slots (four 64 GB-class modules), while the PDF user manual says 192 GB (four 32 GB modules). The documents differ in age; in practice 48 GB and 64 GB modules may need a current BIOS to be fully supported.
Does it support DDR4 memory?
No. This board is DDR5-only. The MAG B760 TOMAHAWK WIFI DDR4 is a separate, electrically incompatible board — check the '-00xR' suffix and the DDR5 label on the box before buying memory.
Does it support ECC or registered memory?
No. Only unbuffered, non-ECC DDR5 is supported.
How many SSDs can I install?
Three M.2 SSDs (all PCIe 4.0 x4 NVMe; M2_3 also takes SATA M.2) plus four SATA 6 Gb/s drives. A SATA M.2 drive in M2_3 disables SATA_7.
Does it support 14th Gen Intel CPUs?
Yes, per MSI's current spec and product pages. The older manual wording only mentions 12th/13th Gen, and some 14th Gen chips need a current BIOS — check MSI's CPU support list for the exact processor and BIOS version.
Can I overclock my CPU on this board?
No. B760 allows memory overclocking (XMP 3.0) but not CPU core overclocking.
Documentos y referencias oficiales
- MSI MAG B760 TOMAHAWK WIFI specifications
Official spec sheet: memory capacity, speed tables, storage and CPU support. - PDF MSI MAG B760 TOMAHAWK WIFI user manual (PDF)
Official manual: slot layout, RAID notes, M.2 installation details. - MSI MAG B760 TOMAHAWK WIFI product page
Official product page with current CPU generation support. - MSI store — MAG B760 TOMAHAWK WIFI
Manufacturer store listing and overview. - MAG B760 TOMAHAWK WIFI manual (ManualsLib)
Handy online copy of the manual for quick reference.